Technical Specifications - Montarbo DSI-12 Notice D'emploi

DSI-12
8
9
8 HEADPHONE
Connect your headphones to this output. To control the output level, use the dedicated
knob or input gain of the sources you intend to listen to using the headphones.
9 MONITOR
Connect your audio monitors to these balanced Left/Right outputs. To control the
overall output level, rotate the dedicated knob or correctly set playback volumes from
PC or your DAW control panel.
10 USB PORT
Connect this port to your PC to provide power and audio connection to your card.
12
USE WITH WINDOWS
Download the updated drivers from: www.montarbo.com
Install the drivers in your PC following the instructions.
Turn off the computer and connect your sound card using the provided USB cable.
Restart your computer, which will detect your sound card. Then make the necessary
settings to use your sound card.
USE WITH MAC
No additional dedicated drivers are required. Connect the sound card to your Mac USB port
and the system will be able to operate autonomously.
10

TECHNICAL SPECIFICATIONS

Sampling
Input
Outputs
Connection
Buttons
Knobs
Dimensions
Weight
Provided accessories
24-bit / 192 kHz
Combo (XLR + 6.35mm jack)
2 balanced jack outputs, headphone stereo output
USB 2.0
Line/Instrument, 48V
INPUT GAIN, HEADPHONE VOLUME, MONITOR volume
94x61x112mm
450g
USB cable, 6.35mm to 3.5mm stereo adapter
User manual
13