Montarbo DSI-12 Notice D'emploi page 6

DSI-12
DESCRIPTION
1
2
4
3
6
10
1 48V
This button turns on 48V phantom power. Make connections before turning on 48V, and
turn off 48V before disconnecting the microphone cable.
2 INST
Press this button if you want to connect an electric instrument (bass, guitar, etc. ..) or
5
other equipment with high output impedance to 6.35 mm jack input.
3 INPUT GAIN
Adjust this knob to obtain - as indicated by LEVEL indicators - a level which is ideal for
recording. CLIP leds must flash on musical peaks only.
4 LEVEL
This LEDs indicator shows the signal levels. Adjust your DAW knobs and controls in a
way that CLIP indicators flash on musical peaks only.
5 HEADPHONE VOLUME
7
Use this knob to adjust your headphones listening level. Always start from the minimum
and raise gradually. High-level listening can damage your hearing.
6 COMBO INPUT
Combo input connection for connecting audio sources. Please, make the connections
with the sound card turned off.
7 MONITOR
Use this knob to adjust audio monitors overall output signal level.
User manual
11