Cleaning And Maintenance - Interline SMPC- 500 Instructions De Service

Cleaning and maintenance

Risk of damage to the appliance!
Do not lift the pump with the cable or pressure hose as these are not designed for the
Attention!
tensile stress from the weight of the pump.
– Submerge the pump at an angle into the liquid to be delivered so that no air pocket forms on
the underside of the appliance. Suction would be prevented by this.
– When using as a submersible pump, Leave the pump on the bottom of the liquid container.
Use a strong rope attached to the carrying handle of the pump for lowering.
– Tighten the end of the rope firmly after lowering.
Note:
For operation with rope:
Do not operate the pump without pressure hose.
Avoid the pump twisting around its longitudinal axis.
Operation
By adjusting the position of sensor switch in support to have different pump starting water level.
This product provides several vertical adjustment positions.
Cleaning and maintenance
Cleaning and maintenance overview
Before every use
Check casing and cables for damage.
Check sensor switch if damage or not
www.interline-products.nl
EN
5