Beamz Disco Set IV Manuel D'instructions page 4

REPLACING THE BATTERIES
• If your machine stops working after a while, the batteries may require replacing.
• Switch Off the On/Off switch and remove the only screw from the top of the product.
• Remove the cover and remove the old batteries and replace with a new 1.5V LR6 'AA' type battery. Replace the
top cover.
SPECIFICATIONS:
Input power:
4pcs size LR6 "AA" 1.5V battery or input 220~230V~50/60Hz - Output: 6V dc 400mA
Tank capacity: Approximately 100ml.
SOUND RESPONSIVE LED MOTOR FOR MIRROR BALL
GENERAL SAFETY RECOMMENDATIONS:
- Read the manual prior to using the unit.
- Keep the manual for further reference.
- Keep the packaging so that you can transport the unit in its original packaging in order to avoid damage.
- For indoor use only. Do not use the unit in a humid environment.
- Do not use the unit close to heat sources or under direct sun light.
- Make sure that no liquids or small components can enter the housing.
- Use a damp, dust-free cloth to clean the unit. Do not use cleaners or solvents!
- The unit doesn't contain user serviceable parts.
- Keep out of the reach of children.
- The unit should only be repaired by an qualified electronic repair shop.
- FIRE HAZARD: install the mirror ball with motor at a distance of at least 2 ft from flammable materials (decoration
material and others).
- DANGER: Before the first use of an mirror ball and a motor, the installation needs to be checked by an adult.
INSTALLATION:
NOTE: Follow the instructions diagram carefully when mounting the motor and mirror ball.
A falling mirror ball can cause serious injuries!
- The installation must be done in such a way that it can support 10 times the weight of the mirror ball (approx 20
lbs).
- Motor and mirror ball must be installed out of the reach of children and pets.
- Use only the supplied chain with this product.
The supplied chains are made to the load of the motor.
- Hang motor from a hook in your ceiling. Make sure the hook can support the products' weight.
OPERATION:
- Open battery compartment and install batteries.
- Use switch on side to turn motor on.
- Use only the supplied chain with this product.
- Hang motor from a hook in your ceiling. Make sure the hook can support the products' weight.
- You are now ready to party!