Tips & Troubleshooting - Jensen 142NG Manuel Du Propriétaire

TIPS & TROUBLESHOOTING
If the fire table will not ignite or stay lit
Make sure that the gas shut-off valve is fully open and that the connection between the
hose and the quick connect socket is correct. Verify that the valve key is not stripped out
and that the valve is opening/ closing. Make sure that the hose does not have any kinks or
sharp bends.
Other Common Problems
Clogged or Obstructed Burner
It is common for bugs, especially spiders, to make webs or nests inside of burner tubes. If it seems
like you are getting low or no gas flow, visually check all openings in the burner for signs of clogs. If
you see anything clogging the burner try using compressed air to remove the debris.
High Winds
High winds may cause the flame to blow out. Do not operate your fire table in high wind conditions.
If you continue to have problems with your fire table please
contact Real Flame customer service at : 1-800-654-1704
1 3