Description; How To Charge - Protect KN-L8033LA Mode D'emploi Et Notice D'installation

4. DESCRIPTION

1. LED light
2. ON/OFF switch and selection 1 or 2 tubes
3. Hole for wall mounting
4. Input micro USB DC 5V
5. Charge indicator

5. HOW TO CHARGE

Before charging or recharging your appliance, carefully read
the section warning for the rechargeable lead-acid battery in
this manual.
Using the included USB cable, plug the micro USB into the input on
the side of the device and the other end of the cable into a
compatible USB power source. The charging indicator lights red
during charging.
When battery is fully charged, disconnect the USB cable. Your
device is ready to use.
Charging time : 6-8h.
When the battery is discharged below the limit level, the device turns
off to protect the battery life. Then recharge the device.
23