NKE TIC PMEPMI Guide Utilisateur page 2

Guide utilisateur « Capteur TIC PMEPMI »
NOTICE
Nke Watteco reserves the right to make changes to specifications and product descriptions or to discontinue
any product or service without notice. Except as provided in Nke Watteco's Standard Terms and Conditions of
Sale for products, Nke Watteco makes no warranty, representation or guarantee regarding the suitability of its
products for any particular application nor does Nke Watteco assume any liability arising out of the application
or use of any product and specifically disclaims any and all liability, including consequential or incidental
damages.
Certain applications using semiconductor products may involve potential risks of death, personal injury or
severe property or environmental damage. Nke Watteco products are not designed, authorized or warranted
to be suitable for use in life saving or life support devices or systems. Inclusion of Nke Watteco products in such
applications is understood to be fully at the Customer's risk.
In order to minimize risks associated with the customer's application, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
Nke Watteco assumes no liability for applications assistance or customer product design. Nke Watteco does
not warrant or represent that any license, either express or implied, is granted under any patent right,
copyright, mask work right, or other intellectual property right of Nke Watteco covering or relating to any
combination, machine or process in which such semiconductor products or services might be or are used. Nke
Watteco's publication of information regarding any third party's products or services does not constitute Nke
Watteco's approval, warranty and endorsement thereof.
Resale of Nke Watteco's products with statements of functionality different from or beyond the parameters
stated by Nke Watteco for that product as defined by Nke Watteco's unique part number, voids all express and
any implied warranties for that product, is considered by Nke Watteco to be an unfair and deceptive business
practice and Nke Watteco is not responsible nor liable for any such use.
Embedded software is based on Nke Watteco proprietary drivers and applicative code and operates on the
Contiki kernel from the SICS (Swedish Institute of Computer Science).
www.watteco.com
www.nke-electronics.com
© nke Watteco. All Rights Reserved
All Rights Reserved – nke Watteco® Page 2 of 17 Guide utilisateur – Capteur TIC PMEPMI