Table des Matières
Publicité
Caractéristiques techniques
Tension de service
220 V - 240 V ~ 50 Hz
Prise de puissance propre
env. 2W
Puissance de coupure
max. 1000W pour une lampe à incandescence
max. 500 W pour un tube fluorescent
Durée d'enclenchement
Réglable entre 5 secondes et 9 minutes
Zone de couverture PIR
max. 270°
Portée PIR
max. 12m
Seuil crépusculaire
> 5 lux réglable
Type de protection
protégé contre les éclaboussures
Classe de protection
2
Température de service
entre -15°C et +50°C
Dimensions (L x l x H)
145 x 75 x 80 (mm)
Masse
env. 260g
34
Parts descriptions
(see fold-out page)
1 PIR motion detector
2 PIR sensor lens (adjustable)
3 Setting control for twilight switch (brightness)
4 Casing screw
5 Connection plug for mounting plate (7)
6 Setting control for switched-on time (lighting time)
7 Mounting socket for wall mounting
8 Connection socket for connection plug (5)
9 Terminal strip for power grid and lighting circuit connections
10 Cable opening with rubber bushing for power grid access
11 Mounting holes in housing for wall mounting
12 Corner mounting for 90°
Safety instructions
Damage due to non-compliance with this operating guide voids
the warranty. We will not accept liability for consequential dama-
ge.
We will not accept liability for damage to property or injury to per-
sons caused by mishandling or non-compliance with the safety
instructions. Under these circumstances, the warranty is void.
- For safety and certification (CE) reasons, unauthorised modifications and/or chan-
ges to the PIR motion detector are not permitted.
- Consult suitably qualified personnel if you have doubts about how the equipment
operates or about how to connect it.
- Comply with the safety and operating instructions of any other appliances that are
connected to the motion detector.
- Do not leave the packing material lying around carelessly. Plastic films and/or bags
and polystyrene parts etc. can become dangerous toys in the hands of children.
- On commercial premises, the accident prevention regulations for electrical equip-
ment must be complied with.
- In schools, training centres, computer and self-help workshops, use of the product
must be supervised by trained personnel in a responsible manner.
15
Publicité
Table des Matières
