Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Option TWO ： Using WPS (Wi-Fi Protected Setup)
Please use Option ONE if your router does not support WPS.
1 Power on
Plug the extender into an electrical outlet near your
router, and wait until the Power LED is lit and solid blue.
2 Connect
① Press the WPS button on your router, and then press
the
button on the extender within 2 minutes.
WPS
The
LED should change from blinking to a solid
state, indicating a successful WPS connection. If not,
please use Option ONE.
Some ISP gateways disable the WPS function by default. If
the WPS method fails, please use Option ONE.
② If you are connecting to a dual-band router, but only
or
LED is on, please repeat step
connect the other band.
3 Relocate
① Plug the extender into an electrical outlet about halfway
between your router (Host Network) and the Wi-Fi dead
zone.
English
Press
to
5
Publicité
Table des Matières
