Random play
You can listen all the tracks in a random order by this function.
Encoding of Phono into MP3 file
The system is able to encode the Phono to MP3 format and recording at memory media with USB
connecting port (support maximum up to 2GB memory size).
A) Phono encoding
1)
Set the Function knob (9) to "Phono" mode and then press " Rec" Button (7).
2)
The Record LED indicator (14) will light up a second then change to flashing. Now the system was
ready to encoding.
3)
Start playback at Phono of the track which you want to recording to USB.
4)
After finish of recording, press the " Rec" Button (7) again during recording mode.
REMARK:-
-
The recording speed is 1:1 and according to the actual playing time of the record.
-
The system will create a "PHONO" folder and then store the encoding track in it.
-
The recording format is preset at – MP3 bit rate: 128 KBPS, sampling rate: 44.1kHz.
-
To interrupt the recording, press the " Rec " Button (7) again during recording mode.
-
To avoid the system confusing and wrong action, please insert either one media only for recording.
Otherwise, system will select the recording media randomly.
B) Track separation (by remote handset)
You can divide the recording music from Phono to USB track by track during encoding. Every time when
press the "
" (Track Separation ) Button once during encoding, the system will generate a new track
and the Record LED indicator (14) will goes off a second then change back to flashing again. It means the
unit is creating a new track successfully.
Removing of USB / memory card
To remove the USB/Memory Card, turn off the power or switch the function mode to Phono first. For USB
port -- unplug it by pulling out the USB socket directly.
Line out connection
You can connect the system to your whole Hi-Fi system by connecting the Line out Socket (21) to the
auxiliary input socket with a RCA cable (not included).
Turntable lock
This unit had design with turntable lock screw (16), turn in clockwise direction to release the lock before
use this device.
Remark: Due to ErP stage two requirements and protect the environment. The unit
will switch to standby mode automatically once no any music playing over 15
minutes.
This is to certify that TR22USB is in conformity with:
Council directive 89/336/EEC (EMC direction):
Applicable standards:
EN55013:2001+A1:2003+A2:2006
EN61000-3-2:2006+A1:2009+A2:2009
EN61000-3-3:2008
EN55020:2007
Made in PRC
For more information please visit our website
www.mpmaneurope.com
3