Location Of Controls; Listening To Phono - MPMan TR22USB Manuel D'instructions

LOCATION OF CONTROLS

1) On/Standby button
2) Play/Pause/Stop
3) Skip Up button
4) Skip Down Button USB Socket
5) Repeat/Random button
6) Folder up button
7) Record Button
8) TS button
9) Function knob
10) Standby/Phono LED indicator
11) USB LED indicator
12) Play LED indicator
13) Repeat/Random indicator
14) Record LED indicator
15) USB socket
16) Turntable lock screw
17) Spindle Adaptor
18) Auto Stop On/Off Switch
19) Turntable Speed Selector
20) Pick-Up Holder
21) Line Out Socket
22) AC Power Cord
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Precautions for use
Installation
•
Unpack all parts and remove protective material.
•
Do not connect the unit to the mains before checking the mains voltage and before all other
connections have been made.
•
Do not cover any vents and make sure that there is a space of several centimeters around the unit for
ventilation.
Connection
1. Connect the Power Cord (22) to AC outlet, the Standby/Phono LED indicator (10) will light up with red
means the unit at standby mode.
2. Press the On/standby button (1), the Standby/phono LED Indicator (10) will change to green. It's mean
the unit was switch on and set in Phono mode.
Remark: please connect your turntable unit to your Hi-Fi system with speaker for music
listening.

Listening to Phono

NOTED:
- Remove the stylus protector.
Be sure that the tone arm is being detached from the tone arm rest before
-
operating and re-secured again after wards.
1. Press Function button (9) repeatedly until Standby/phono LED Indicator (10) light up with green
2. Set the speed selector (19) to the proper position depending on the record to be played.
3. Place the record on the platter (use the Spindle Adaptor if required).
4. Lift the tone arm from the rest and slowly move it to the record side. The platter will
start to rotate.
Place the tone arm to the desired position of the record
5.
6. At the end of the record, the platter will automatically stop rotating. Lift the tone arm
from the record and return to the rest.
7. To stop manually, lift the tone arm from the record and return it to the rest.
Button
.
1