Fault Finding - Gamko KFK Serie Mode D'emploi

The waste disposal cooler should be cleaned with look‑warm water and a mild domestic cleaner, never use
abrasives or harsh chemicals. You may clean the inside by means of a high pressure spray gun. You should
clean the condenser at least once a month by means of a vacuum cleaner or compressed air.
Emergency Pull out the plug!
Please ensure the plug is disconnected from the mains.
Symptom: Temperature is too high with correctly set thermostat.
Cause: a. The refrigeration machine has no power supply
b. Cooler is overfull
c. Door is not closed fully
d. Thermostat is out of order
e. Compressor is out of order
f. The air flow grills are covered
g. The condenser is blocked with dust
Solution: a. Check power supply
b. Replenish capacity more regularly
c. Clean the magnetic door gaskets or replace
d. Call your local Gamko distributor
e. Call your local Gamko distributor
f. Clear the air flow grills
g. Clean the condenser
Symptom: Temperature is too low with correctly set thermostat
Cause: Thermostat is out of order
Solution: Call your local Gamko distributor
16
Maintenance

Fault finding