Normal Operating Characteristics - GE FCM5 Manuel D'utilisation Et D'installation

Troubleshooting Tips... Before you call for service
Problem
Door/lid won't fully close
by itself
Slow starting time after
being off
NOTE:

Normal Operating Characteristics

These things are normal and do not indicate a need for service.
transfers heat from the inside to the outside through
the exterior cabinet walls.
10
Possible Causes
Package holding door/lid open.
Built-in overload protection.
Door/lid left open.
Too frequent or too long lid
openings.
Not unusual during periods of
high humidity.
GEAppliances.com
What To Do
Move package to a different location.
This is normal after being off.
Check to see if package is holding door/lid
open.
Open the lid less often.
Wipe surface dry.
49-1000422 Rev. 0