Accessories And Replacement Parts; Disposal; Technical Specifications; Warranty/Service - Beurer Barbers Corner HR 6000 Mode D'emploi

3. Leave the stainless steel razor blade to
dry completely before reattaching it to
the device.
10. Accessories and
replacement parts
The stainless steel razor blade of the HR
6000 is self sharpening. For hygienic rea-
sons, the stainless steel razor blade can be
reordered from the webshop at:
www.beurer-shop.de
Designation
Stainless steel
razor blade

11. Disposal

For environmental reasons, do not dispose
of the device in the household waste at the
end of its service life. Dispose of the device
at a suitable local collection or recycling
point in your country. Dispose of the device
in accordance with the EC Direc-
tive on Waste Electrical and
Electronic Equipment (WEEE). If
you have any questions, please
contact the local authorities re-
sponsible for waste disposal.
WARNING
The integrated battery cannot be removed
for disposal. Risk of explosion and injury.
The lithium-ion battery used in this de-
vice must not be disposed of in household
waste, but must be disposed of correctly.
For information on disposal, please contact
the authorised seller or a municipal collec-
tion point.
During disposal, it must be pointed out that
the device contains a battery.
Discharge the battery before disposal. Take
the device and switch the Body groomer on
until the battery is flat.
Item number and/
or order number
734.147
34
NOTE
If it is not possible to discharge the battery
due to a fault or damage, please consult
your waste collection point.

12. Technical specifications

Model
Weight
Device dimensions 17.1 x 3.8 x 3.3 cm
Device protection
type
Device input
Adapter protection
type
Adapter protection
class
Voltage supply
(TPA-
97050100BU)
Average efficiency
during operation
No-load power
consumption
Battery:
Capacity
Nominal voltage
Type designation
Subject to technical changes

13. Warranty/service

Beurer GmbH, Söflinger Straße 218, 89077
Ulm, Germany (hereinafter referred to as
"Beurer") provides a warranty for this pro-
duct, subject to the requirements below and
to the extent described as follows.
The warranty conditions below shall not
affect the seller's statutory warranty ob-
ligations which ensue from the sales ag-
reement with the buyer.
HR 6000
103 g
IPX6
5 V 1 A
IP20
II
Input: 100-240 V~;
50/60 Hz; 0,15 A
Output: 5,0 V
1,0 A; 5,0 W
73,9 %
0,09 W
600 mAh
3,2 V
Li-Ion
35