Cleaning And Maintenance; Disposal; Technical Specifications - Protect KN-6120LSMD Mode D'emploi

the LED will not light up and the battery will recharge fully. In the
event of a power failure, the lantern will automatically turn on
according to the selected programming.

7. CLEANING AND MAINTENANCE

Before cleaning your appliance, carefully read the safety
instructions in this manual.
Before cleaning, be sure to turn off the appliance and switch off the
power supply. We recommend that you keep your appliance and
accessories clean and clean them at least once a month. Do not use
water or detergent for cleaning. Clean the device with a dry cloth.
Use a small soft brush if necessary. It is recommended that you
periodically check the condition of the power cord. If necessary,
replacement requires the use of a special tool : contact an
authorized service center for repairs. If the unit is not used for a long
time, store it away from dust and moisture ; We recommend using its
original packaging. If the unit was in operation, allow it to cool down
as needed.

8. DISPOSAL

Please read the sections Important safety instructions and
Warning for the rechargeable lead-acid battery carefully.
2 rechargeable lead-acid batteries RB430B - 4V3.0Ah (BAT4V3AH).
This unit is not designed to modify/replace its battery. After the
battery lifetime has been reached, dispose of the appliance. To
remove the battery from the appliance, remove the transparent
cover with a flat screwdriver. Once the cover is removed, remove the
LED panel. You will then be able to access to the battery.
Disconnect the battery connectors. Dispose of the battery safely in
accordance with current regulations. The battery must be removed
from the appliance before it is disposed of.

9. TECHNICAL SPECIFICATIONS

Reference : KN-6120LSMD
Power source : 220-240V~ 50/60Hz
24