Controls - GE PSB42 Manuel D'utilisation Et Instructions D'installation

Controls

NOTE: The refrigerator is shipped with protective film covering the temperature controls.
The temperature controls display the SET
vary slightly from the SET temperature based on usage and operating environment.
Changing the Temperature for Non-dispense Models
To change the temperature, press and release the
(+) or (-) pad to the desired temperature set point for
refrigerator to reach the temperature you have set.
Changing the Temperature for Dispense Models
To change the temperature, press and release the
Freezer or Fridge pad. The display will show the set
temperature. To change the temperature, press either the
Freezer or Fridge pad until the desired temperature is
displayed.
49-60814 Rev. 1
Non-dispense Models
To turn OFF cooling system, press and hold either (+)
pad until both displays show OFF.
To turn OFF cooling system, press and hold Fridge
and Ice Maker simultaneously for 3 seconds. When the
cooling system is OFF the display should read OFF.
5