Intended Use; Package Content - tiko Energy Solutions tiko Meter Aramis Mode D'emploi

Meter User's Manual

Intended Use

The Meter is a custom energy meter to be only used in tiko Energy Solutions AG authorized
setups. It requires a Bridge-Box (REF CMB-01.1011) to be powered and to operated. It
cannot be used standalone.
The Meter presents on both sides an SBUS connector (IMAGE 1) to be daisy-chained
with other devices of the same family.
Any installation or usage which does not conform to tiko Energy Solutions AG setup is
strictly forbidden. tiko Energy Solutions AG is not responsible for any improper installa-
tion/usage of this device.
Features
Meter features:
•
meters instantaneous energy consumption
•
status LEDs showing data connection and device errors

Package Content

Open the package and check that you have all the following items:
•
Instructions manual
• Meter
•
20 cm SBUS interconnection cable or SBUS inter-connector (IMAGE 2)
•
Clip A and Covers B and C (IMAGE 3)
If any of the parts are incorrect, missing or damaged, please contact the retailer where
you made your purchase. Keep the carton box, including the original packing materials, in
case you need to return the unit for repair.
Device
IMAGE 4 shows the device from various sides. It indicates the LEDs and the clamping
terminals for Line In ❶, Line Out ❷ and the Neutral Reference ❸.
On the left side is a label indicating
•
The manufacturer
• The device model number (REF) and the current rating
•
The hardware (HW) and firmware (FW) version
•
The unique serial/MAC address as text and as Aztec 2D code (SN/MAC)
tiko Energy Solutions AG
English
Overview
4 / 44
IM-0007-0003 Rev. 6