Precautions for Installing the Car Mounter
Do Not Install This Product in
Unstable State
If balance of the unit is lost, it may fall
over or drop, resulting in an injury.
Do Not Install This Product
Wherever There is a Lot of Water,
Moisture, Steam, Dust, Oily Vapors,
etc.
Otherwise, possibly resulting in fire or
electric shock.
CAUTION
In accordance with the laws of each country, install this Car Mounter
at a position not interfere with the driver's view.
Dimensional Drawing
75
(Compatible with the VESA FPMPMI standard)
Installation holes are provided in the areas indicated by the arrows in the
figure above.
Install This Product Only In the
Passenger Compartment
If this product is installed in the engine
compartment, possibly resulting in fire
or electric shock.
10.5
5
7.4
82
11.6
30.5
7