Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operation - Basics

Power on/off

Press
on the front panel or on the RC to power the device on. Hold to switch off (RC / panel / screen).
Insert / Eject Discs
Insert discs with the printed side facing up into the disc slot. Do not push any further when you feel slight
resistance. The disc drive pulls the disc in automatically. Press
, to eject the disc.
USB & SD
Insert USB drives into the USB slot on the front panel. SD cards are to be inserted into the SD card slot. Do
not use any force. The storage media fit one way only.
The device reads inserted media automatically. Choose USB or SD modes using the MOD/MODE buttons
(front panel / RC) or via the home menu (touch screen)
AUX IN
Connect external media players (Laptop PC, MP3 player, tape deck, smartphone, etc.) to the AUX jack using
a 3.5mm audio cable (not supplied). Use the external player for media playback. Adjust the volume on the
car hifi. Switch to AUX mode with the MOD/MODE buttons or using the home menu on the touch screen.
Open / Close Monitor
Press
(or OPEN on the front panel), to open or close the monitor. Press and hold to adjust the monitor
angle (the monitor stops moving when you stop pressing. Do not try to adjust the monitor angle manually
on the Y-axis. You can rotate the monitor, though, on the X-axis (sideways). Make sure, however, to put it
back into its central and perpendicular position before inserting it back again.
33

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

10006702

Table des Matières