Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2. Install chain retainers ("S" hooks) to upper edges of cabinet
base.
3. Install electronic ignitor through cabinet wall. Tighten nut to
threaded stem.
4. Insert battery into electronic ignitor with positive terminal facing
outward.
5. Thread ignitor cap onto threaded stem of electronic ignitor.
2
6. Attach lightpost top cap to shroud assembly with 4 screws (C).
7. Remove 2 shipping screws from top assembly.
8. Remove top assembly, then place top assembly against rear of
burner assembly.
Burner
Assembly
www.desatech.com
Top Assembly
123222-01A
Publicité
Table des Matières
