Security Instructions - Zipper Maschinen ZI-BHA1500D Manuel D'utilisation

12.2 Security instructions

Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the operator
and limit the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security instructions!
Keep your work area dry and tidy! An untidy work area may cause accidents. Avoid
•
slippery floor.
Make sure the work area is lighted sufficiently
•
Do not overload the machine
•
Provide good stability and keep balance all times
•
Avoid abnormal working postures! Make sure you stand squarely and keep balance at all
•
times.
Keep away from the running drill!
•
Always stay focused when working. Reduce distortion sources in your working
•
environment. The operation of the machine when being tired, as well as under the
influence of alcohol, drugs or concentration influencing medicaments is forbidden.
Respectively trained people only and only one person shall operate the machine.
•
Do not allow other people, particularly children, to touch the machine or the cable. Keep
•
them away from your work area.
Make your workshop childproof.
•
Make sure there is nobody present in the dangerous area. The minimum safety distance
•
is 2m
Wear suitable work clothes! Do not wear loose clothing or jewellery as they might get
•
caught in moving parts and cause severe accidents! Wear a hair net if you have long
hair.
Use personal safety equipment: safety gloves, dust musk, ear protectors and safety
•
goggles when working with the machine.
Never leave the machine running unattended! Before leaving the working area switch
•
the machine off and wait until the machine stops.
Always disconnect the machine prior to any actions performed at the machine.
•
Avoid unintentional starting
•
Do not use the machine with damaged switch
•
The plug of an electrical tool must strictly correspond to the socket. Do not use any
•
adapters together with earthed electric tools
Each time you work with an electrically operated machine, caution is advised! There is a
•
risk of electric shock, fire, cutting injury;
Protect the machine from dampness (causing a short circuit)
•
Use power tools and machines never in the vicinity of flammable liquids and gases
•
(danger of explosion)
Check the cable regularly for damage
•
When working with the machine outdoors, use extension cables suitable for outdoor use
•
Do not use the cable to carry the machine or to fix the work piece
•
Protect the cable from heat, oil and sharp edges
•
Avoid body contact with earthed
•
Before starting the machine remove any adjusting wrenches and screwdrivers
•
Rotating parts can cause severe cut injuries
•
Keep the drills sharp and clean, so they get stuck less often and are easier to guide
•
Keep any machine that is not being used out of reach of children
•
ZIPPER MASCHINEN GmbH
ZI-BHA1500D
www.Zipper-Maschinen.at 24