Control Panel; Rating Plate; Operation; Sousvide Cooking - Casio SV 1200 Smart Mode D'emploi Original

17.3 Control Panel

Display: Current temperature and remaining cooking
time are displayed in a 5 second alteration.
setting of temperature/time
activation/deactivation of device and starting of
heating process
Change setting of temperature to setting of time
& button to activate the Wi-Fi module

17.4 Rating plate

The rating plate with the connection and performance data can be founded on the back
side.

18 Operation

This chapter provides instructions on the proper operation of your device:

18.1 SousVide cooking

Cook gently in a vacuum bag. The food is cooked at low temperature in its own juice,
making it particularly tender and tasty.
1. Plug in the power plug.The button
the device is in standby mode. Press button
2. You can change between temperature setting in °C and °F with
Default setting is °C. Press
3. Set desired temperatur (0 – 90° C) with
4. Press button
and , confirm with
Confirm with
5. You can hear a signal and the operation indicator is flashing when the desired
temperature is reached..
6. The device will beep once desired temperature is reached. Place the vacuumed food
into the cooking vessel. If needed weight the vacuumed bags.
7. The device counts down the time and will beep again, once time is over. Then "END"
is shown in display.
to confirm the temperature setting.
, to set the time. The timer is flashing. Set desired hour with
then set desired minute with
and the device starts the heating process
and operation indicator are illuminated and
briefly until the device beeps.
and .
and
and .
37