TENA SmartCare Change indicator Manuel page 10

WARNINGS
EN
• The gateway should not be sterilized.
• The gateway should not be used in an oxygen-rich
environment.
• The gateway should not be used near flammable anesthetics.
• Do not attempt to repair the gateway by yourself.
• Only use the power supply provided with the gateway.
• If the gateway connection cannot be established, it will not
be able to send information and work as expected. In such
a case, please revert to a manual process for checking
incontinence products.
• Do not open or modify the gateway.
• Changes or modifications not expressly approved by the party
responsible for compliance, could void the user's authority to
operate the equipment.
• Save this user manual for future reference.
• If any changes to the installation are necessary, please
contact TENA SmartCare support.
• Devices shown are not in actual size.
• The adhesive strip will not adhere well to dirty, dusty or oily
surfaces and may not adhere well to vinyl surfaces. Do not use
the adhesive strip on wallpaper, bare wood or on porous and
painted surfaces.
10
IMPORTANT INFORMATION