Knob And Function Buttons; Assembly - CASO DESIGN B 1800 PowerBlender-Set Mode D'emploi

13.2 Knob and function buttons

button CRUSHED ICE press this button to start the function
button AUTO PULSE press this button to start the function
button SMOOTHIE press this button to start the function

13.3 Assembly

Blender jar
1. Turn the blender jar without the lid, tightly
screw the blade base. Turn the blender jar
again, so that the blade base is at the bottom.
2. Place the blender jar on the motor unit, as shown on photo 2, tighten clockwise.
Knob
OFF – switches device off
ON – setting so that you can use
the function buttons
MIN-MAX: Stepless adjustment of
the speed
Individually adjustable (device
switches off (for safety) after
approx. 10 minutes for the blender
jar & after approx. 1 minute for the
grinder / Mix & Go bottle. Then turn
the device to OFF, and you can
use it again.
Function buttons
button PULSE: MAX speed as
long as button is pressed
38