ARENDO 300792 Mode D'emploi page 12

4.2 Energy display
The energy display provides a wide range of information. The table below gives
an overview of the various values:
Display displayed value
V Electrical voltage
A Current
Hz Frequency
POWER FACTOR Power factor
OVERLOAD + W Overload limit in W
W Power
If the energy consumption exceeds the overload limit, then this is indicated by a
flashing "OVERLOAD".
4.3 Cost display
The cost display provides a wide range of information. The table below gives an
overview of the various values:
Display displayed value
kWh Kilowatt hours
COST + kWh Price per kilowatt hour
Time (in days), during which the energy was consumed;
Day the value is incremented by 1 once the time display counts
24 hours
KgCO₂ CO₂ emission (1 kWh corresponds to 0.998 kg of CO₂)
COST Energy costs (kilowatt hours x price per kilowatt-hour)
Press the "SET" and "COST" buttons simultaneously to reset the registered energy
cost values.
12
English