Maintenance - OBSIDIAN CONTROL SYSTEMS NETRON RDM 10 Guide D'installation

M A I N T E N A N C E
The Obsidian Control Systems Netron RDM10 is designed as a rugged, roadworthy device. The only required
service is occasional cleaning. For other service related concerns, please contact your Obsidian Control
Systems dealer, or visit www.obsidiancontrol.com.
Any service that is not described in this guide must be carried out by a trained and qualified Obsidian Control
Systems technician.
As any computer, the RDM10 requires periodic cleaning. The schedule relies on the environment in which the
controller is operated. An Obsidian Control Systems technician can provide recommendations if necessary.
Never spray cleaner directly onto the device surface; always spray into a lint-free cloth and wipe it clean.
Consider using cleaning products designed for cellphone and tablet devices for cleaning a lighting console.
Important! Excessive dust, dirt, smoke, fluid build-up, and other materials can degrade the
performance of the RDM10 controller, causing overheating and damage to the unit that is not
covered by the warranty.
Fuse Replacement:
Single fuse in the Line side; the RDM10 is protected by a single 1A slow blow mains fuse in a
fuse holder on the back of the device.
Disconnect the product from AC mains power before replacing the fuse as parts of the product
may remain live even if one of the two mains fuses has blown.
12