Protect Our Environment - Dexter 20VRPS2-180.1 Mode D'emploi

11. TROUBLE SHOOTING
PROBLEM
PRODUCT DOES NOT START
THE MACHINE STOPS
WORKING AFTER
SAWING SLOWLY
SPARKING VISIBLE
THROUGH THE HOUSING
AIR VENTS
UNSATISFACTORY RESULT

12. PROTECT OUR ENVIRONMENT

CAUTION : This product has been marked with a symbol relating to removing electric and electronic waste. This means that this product shall not
be discarded with household waste but that it shall be returned to a collection system which conforms to the European WEEE Directive. Contact
your local authorities or stocks for advice on recycling. It will then be recycled or dismantled in order to reduce the impact on the environment.
Electric and electronic equipment can be hazardous for the environment and for human health since they contain hazardous substances.
13. WARRANTY
Dexter products are designed to the highest DIY quality standards. Dexter provides a 36-month warranty for its products, from the date of purchase.
This warranty applies to all material and manufacturing defects which may arise. No further claims are possible, of whatever nature, direct or
indirect, relating to people and /or materials. Dexter products are not intended for professional use.
problem or correct the defect.
Repairs or the replacement of parts will not extend the original warranty period.
Defects which have arisen as a result of improper use or wear are not covered by the warranty. Amongst other things, this relates to switches,
protective circuit switches and motors, in the event of wear.
Your claim upon the warranty can only be processed if:
- Proof of the purchase date can be provided in the form of a receipt.
- No repairs and/or replacements have been carried out by third parties.
- The issue is not a matter of normal wear and tear.
accessories).
- The required maintenance and repair works have been performed correctly.
- There has been no forcing, improper handling, unauthorised use, or accidents.
- There is no damage caused by non-observance of the safety instructions and the instructions for use.
- There is no force majeure on our part.
- No incorrect parts have been used, parts not made by DEXTER, whereas they prove to be the cause of deterioration.
- The tool / battery / charger have never been disassembled or opened.
- The tool / battery / charger have been in a wet environment (dew, rain, submerged in water, ...).
- A description of the complaint is enclosed.
POSSIBLE CAUSES
Not connected to power supply
Power battery is defective
Other electrical defect to the product
The battery is low power
The battery is low power
Air vents are blocked
A small amount of sparking may be visible
through the housing vents
Blade is worn
LIKELY SOLUTIONS
Connect to power supply/Battery
Check by a specialist electrician
Check by a specialist electrician
Need to charge the battery pack before operating
Need to change the battery pack before operating
Clean the air vents
This is normal and does not indicate a problem
Replace with new blade
75
e able to solve the
FR
ES
PT
IT
EL
PL
UA
RO
EN