Ezviz A1 Guide De Démarrage Rapide page 6

Basics
Setting Button
Power Input
Speaker
Name
Power Input
ALARM LED Indicator
LINK LED Indicator
READY LED Indicator
Mounting Hole
RESET Button
LED Indicators
(ALARM, LINK,and READY)
Description
Power supply for the device (by USB port).
Steady Red: The A1 is in the normal status.
Red Flicker: An alarm occurs.
Yellow Flicker:The Wi-Fi is connected.
Unlit: The Wi-Fi is disconnected.
Steady White: The A1 is powered on (by USB port).
Hole for hanging the device.
Connect the device to the power supply (by USB port). Press and hold the
RESET button with a needle and release until the 3 indicators flicker at
the same time for once. The device restarts and all settings are restored
except the connected detectors and remote control.
Mounting Hole
RESET Button
2