Hint: The best way to unset the baby carriage
from the chassis is to lift the body a bit after you
have released locking points.
To release the baby carriage from the frame. You
just have to unlock the mounting bars.
THE PUSHCHAIR
To build up the seat unit remove
all package material and lay it
down. Now you see a hinge on
both sides which have to pulled
towards you and then you can lock
it with the adapters seen on the
picture.
The hood can be attached easily
like the carry cot. Press the
Buttons on both sides of the end of
the hood.
ATTACH THE SAFETY BA R
The bumper bar on the body can be removed for easier access. Press the button on
either side of the bumper bar and pull the bumper bar out from the body arms
OPERATING THE FOOTREST
To lower the footrest, reach underneath the footrest and locate the
flattened strip. Pull this down to lower the foot rest.
Give the body a gentle lift to
check that all points are
securely fastened.