Assembly Pontsun; What You Need - Extremis PONTSUN Instructions De Montage

ASSEMBLY PONTSUN

WHAT YOU NEED

2 people
no. 17 spanner
+/- 20 min.
2
1
2. Fasten the legs to the tabletop as shown in the drawing above.
Tip: First install a M10x60 bolt and place a lock nut on the bolt without tightening it completely.
1
a M10x30 bolt with a wave spring washer. Tighten it fully, then do the same with bolt
for the other legs.
3. Remove the trestles.
4 assembly pontsun
1. Put the tabletop on trestles. It is important that they
are not positioned too closely to the edges of the
tabletop so that you can easily fasten the legs.
1
2
1
2
Then install
2
. Repeat these operations
1