Dörr AF-50 Notice D'utilisation page 12

04.3.2 Using with a smartphone/tablet
To use the DÖRR AF-50 wireless microphone set with your smartphone or tablet, please use the supplied TRRS spiral cable
(06) with one 3-pin 3,5 mm mini jack plug (06a) and one 4-pin 3,5 mm mini jack plug (06b). Insert the 3-pin 3,5 mm
mini jack plug (06a) into the output socket (02c) of the receiver (02). Plug the 4-pin 3,5 mm mini jack plug (06b) into
the headphone socket of your smartphone or tablet.
05 | OPERATION
05.1 Switching on/wireless connection
Slide the On/Off switch (01g) to position ON to switch on the transmitter (01) - the LED indicator (01a) flashes blue. Slide the On/Off
switch (02g) to position ON to switch on the receiver (02) - the LED indicator (02a) flashes blue.
Press the "Pair" button (01h) on the transmitter (01) and at the same time the two buttons for volume + and - (02h and 02i) on the
receiver for approx. 2 seconds. While connecting, the blue LED indicators (01a and 02a) flash quickly. If the wireless connection is
successful, the LED indicators (01a and 02a) light up blue constantly.
After a one-time, successful pairing, the transmitter (01) and receiver (02) automatically connect to each other when they are switched
on again.
If the radio connection is interrupted during the recording (e.g. out of range, due to obstacles such as metal objects, walls, people
between the transmitter and receiver), the two LED indicators (01a and 02a) flash blue. If so, get back within the range. The transmitter
(01) and the receiver (02) connect again automatically. If not, please pair them again as described above.
Start the video recording on your camera/recording device or on your smartphone/tablet and speak into the microphone (03). The
person with the transmitter (01) and the microphone (03) will be recorded.
NOTE: When used with smartphone
To hear the sound while playing the video or audio recording, please unplug the cable from your
smartphone/tablet.
05.2 Mute
If you want to interrupt or mute the recording, press the Mute button (01i) at the transmitter (01). While pressing the Mute button, the
spoken word will not be recorded. As soon as you release the button, the microphone or transmitter continues to record.
05.3 Listening to the recordings
The person with the receiver (02) has the option of listening to the recordings made by the person with the microphone (03) and the
transmitter (01). For this you need headphones with a 3,5 mm mini jack plug. Connect the headphone to the headphone socket (02b)
at the receiver. You can use the volume buttons at the receiver (02h = volume up and 02i = volume down) to regulate the volume
of the headphones.
12 doerr-foto.de