Publicité
Les langues disponibles
Les langues disponibles
PROFIL 25 & STOPSTAR
Technical features (for both stopwatches)
Temperature range
During use:
-15 °C to +55 °C
During storing: -25 °C to +65 °C
Batteries
Type:
Mignon cell AA
Capacity:
3 to 4 years
Indication:
If after a RESET, the digits of h,
10min and 1min are flashing, there is still an approx.
3-week reserve.
Display
Profil:
9 digits, height 8/6 mm
Stopstar:
7 digits, height 6.5/4 mm
Indication:
7 digits at Split function:
6 digits at Lap function:
2 digits event counter
Case
ABS
Weight
Approx. 90 g with battery
Precision
PROFIL 25:
STOPSTAR 2:
Time unit
1/100 sec
Memories
PROFIL 25:
24+1 (24 for first, and 1 for the final time)
STOPSTAR 2:
2 (dual measurement)
8
h, mm, ss, 1/100 sec
mm, ss, 1/100 sec
(not included in Stopstar 2)
+/- 7 sec/month (at 20 °C)
+/- 30 sec/month
Functions
PROFIL 25:
Addition, Split, Lap, Uhrzeit, Memory recall
STOPSTAR 2:
Addition, Split
Buttons
PROFIL 25:
4: Start/Stop, Split/Lap, Memory/Display, Mode
STOPSTAR 2:
2: Start/Stop, Split/Reset
SPLIT/LAP
START/STOP
TIME SET
5 MEMORIES
RESET
SPLIT
DISPLAY
MODE
MEMORY
PROFIL 25
Inserting and changing battery
Remove the battery cover by pressure
on the bar located on the bottom of the
case (see illustration).
Place battery with the correct polarity.
Snap the cover back in place.
Installing lanyard and protection pouch:
Remove the battery cover. Insert the lanyard from the outer side of
the case through one of the two holes and pass through the other
hole from the inner side of the case. Pull the both lanyard ends from
inside through the two holes of the protection pouch and then tie them
together.
split
start
reset
stop
h
min
sec
1/100
STOPSTAR 2
Publicité
