How To Use; Steam Ironing - Di4 Performance 3200 Manuel D'utilisation

HOW TO USE

Always check whether a label with ironing instructions is attached to an article to be ironed. Follow
these instructions in all cases.
Turn the temperature control dial round to set the appropriate temperature indicated in ironing ins-
tructions or in fabric label.
Marking
• (1 dot)
•• (2 dots)
••• (3 dots) / MAX
Anti-shine
Insert the main plug into the wall socket. The indicator light will turn on and will start blinking. Once
the selected temperature is reached, the light will be fixed and you will hear an acoustic sound, indi-
cating you may start ironing.
WATER TANK FILLING
Unplug the iron before filling the water tank.
The device is designed for use with tap water. If the water in your area is hard or semi-hard use mix
tap water with distilled or demineralized water purchased in stores, in the ratio 2:1 and 1:1 respectively
(distilled water: tap water). Check with your water supplier to determine the type of water in your
area. Never use 100% distilled or demineralized, rain water, softened water, scented water, water
from other appliances such as refrigerators, air conditioners, dryers or other types of home water
preparation water.
Open the cover for filling.
Slowly pour water through the water inlet.
Do not fill higher than mark on the water tank, in order to avoid spilling out of water.
The water tank should be emptied after each use.
SPRAYING
As long as there is enough water in the water tank, you may use the spray button at any temperature
setting during steam or dry ironing.
Press the spray button several times to activate the pump while you are ironing.

STEAM IRONING

Set the temperature control dial to the desired position in accordance with the manufacturer's label.
The LED of the selected temperature will start blinking until the temperature is reached. Then the LED
will become fixed and you will hear an acoustic sound.
Set the variable steam control to the desired position.
The appliance has an intelligent steam control that will automatically control the variable steam to
make sure its according to the temperature level selected. This means that even the variable steam
Material, for example
Acetate, elastane, polyamida, polypropylene
Cupro, polyester, silk, triacetate, viscose, wool
Cotton, linen
Specially to prevent glare on dark and delicate
garments
17