On Color/Frame Window - Sony LKRI-005 Mode D'emploi

Signal Mode settings Input Signals
8bit Single Full
10bit Twin Full
10bit Single Full
8bit Single Limited
10bit Twin Limited
10bit Single Limited

On COLOR/FRAME Window

26
Installation
For details on how to use the menus, refer to the operating instructions for SRX-series
projectors.
When used in normal. Signal level is DVI1.0, Full Range
compliant.
When the 10-bit signal (10bit Twin mode) based upon Sony
unique specification is input. Signal level is Full Range
compliant.
When the 10-bit signal (10bit Single mode) based upon Sony
unique specification is input. Signal level is Full Range
compliant.
When the DTV signal is input. Signal level is DVI1.0, Limited
Range compliant.
When the 10-bit signal (10bit Twin mode) based upon Sony
unique specification is input. The signal level is Limited Range
compliant.
When the 10-bit signal (10bit Single mode) based upon Sony
unique specification is input. The signal level is Limited Range
compliant.
When you set either "Color Space", "Color Temp", or "Gamma" on
"Color" in the COLOR/FRAME window of the SRX Controller, the
desired setting will be written to the color space description area of the
EDID ROM.
Values to be written to the EDID ROM are shown below.