Assemblage - Blumfeldt Sommerfest Mode D'emploi

1. Select a flat ground for the tent, unpack
the carton and check all the parts
including tubes, tent and accessories...
etc. are present as same as list. Assemble
the framework of the rooftop by joining
the portion (5,6) together with poles
(1,2).To ensure the screw fixed to every
pole tightly.
2. Jack one side up. Attach one end of
supported pole (3) to the joints (5,6).
3. Cover the roof on the frame, and
attach it by the bungee balls properly,
take care of the tension of the bungee
balls, for if you use too many on one
side of tent, it may too tight to tie the
other side of it.

Assemblage

9