Blumfeldt Sommerfest Mode D'emploi page 10

4. Attach the another 4 supported poles
(3) to the joints (5,6), built-up the
framework, use the 6x180 mm peg to
fix each pole into the ground and use
the hook to fix the leg cover to the
ground.
5. Spread the wall panel and door panel
attach to framework by using the
bungee cords clasping the frame to
grommets that is construct over the
wall panel and door panel to ensure
stability. Also use the short pegs to fix
the doors to the ground.
6. The guy lines clasp to each corner of tent
and another end of line fix to ground by pegs
8x300 mm).
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany
10