Rohr DFX-15 Manuel D'utilisation page 6

DFX-15 / DFX-40 / DFX-80 / DFX-150
Charging speed
12V Slow mode - Charges at a slower rate (amps) for better long-term battery performance.
12V Fast mode - Charges at a faster rate (amps) for time sensitive projects.
Charge voltage
Selects the voltage output by the charger. Match this to the voltage of the battery.
Battery reconditioning
These chargers have battery repair technology. This will actively repair batteries which have lost their
ability to hold charge due to becoming sulphated, using advanced pulse rectifier boost technology.
Winter mode
This setting is recommended for batteries at temperatures below 5°C. It is also recommended for AGM
batteries.
Battery voltage
Displays the voltage of the battery.
Battery full indicator / Charge indicator bar
Displays the charge level of the battery and indicates 'full' when completely charged.
Note. This charger has Memory Function. It will return to last mode you chose next time the charger is
connected.
Troubleshooting / Fault codes
6
F1
F2
F3
F4
01. No clamps connected.
02. Short circuit.
03. Reverse polarity connection.
Loose clamps during charging.
Battery voltage is too high.
Bad battery.
© ROHR
English