Aiwa LED-251FHD Mode D'emploi page 13

24
en
MAIN MENU
SATELLITE MODE
Connect your Satellite antenna to the SAT IN
terminal first, to receive satellite signals.
Press SOURCE button on remote control
to select SATELLITE input source.
1 Auto Tuning
- Press MENU buttons to call out the
main menu.
- Highlight Channel using the navigation
buttons and press OK to select.
- Then highlight Auto Tuning and
press OK to select it.
- Country: Select your country.
-
Satellite: Select an avalible satellite.
- Scan Mode: Select your scan mode.
- Channel Type: Select a channel type.
- Service Type: Select a service type.
2 Dish Setup
-
Press MENU button to call out the
main menu.
- Highlight Channel using the navigation
buttons and press OK to select.
- Then highlight Auto Tuning and
press OK to select it.
-
Press / navigation buttons to
highlight Left, Middle or Right column.
- Press EXIT button to return.
When the SATELLITE column is highlihted
1.
Press YELLOW button on remote
control to select Add menu.
- Satellite Name: Press navigation
button to enter rename page. Use
navigation buttons to complete a new
name.
- Longitude Direction: Press
/
navigation buttons to select desired
option.
- Longitude Angle: Press
/
navigation buttons to move the
cursor and press number buttons on
remote control to input desired value.
- Band: Press navigation buttons
/
to select desired option.
2
Press GREEN button on remote control
to select Edit menu.
- The operations of Edit menu are the
same with Add menu.
3
Press BLUE button on remote control
to select Scan menu.
- Press navigation buttons to
/
highlight desired item.
-
Press navigation button to select
desired Scan Mode, Channel Type
and Service Type.
When the SATELLITE column is highlighted,
press EPG button on remote control to
enter TransPonder mode
1.
Press YELLOW button on remote
control to select Add menu.
- Frequency: Press navigation
/
buttons to move the cursor and press
number buttons on remote control to
input desired value.
- Symbol (ks/s): Press navigation
/
buttons to move the cursor and press
number buttons on remote control to
input desired value.
- Polarity: Press navigation
/
buttons to select desired option.
2
Press GREEN button on remote control
to select Edit menu.
- The operations of Edit menu are the
same with Add menu.
MAIN MENU
3
Press BLUE button on remote control
to select Scan menu.
- Press navigation buttons to
/
highlight desired item.
- Press navigation button to select
desired Scan Mode, Channel Type
and Service Type.
When the "KU_HOTBIRD..." column is
highlighted
- LNB (Low Noise Block) Type: Press
navigation buttons to select
/
submenu. Then use navigation
/
buttons to select desired option.
- LNB Power: Press navigation
/
buttons to select desired option.
- 22 kHz: Press navigation
/
buttons to select desired option .
- Toneburst: Press navigation
/
buttons to select desired option.
-
DisEqc1.0 (Digital Satellite Equipment
Control): Press navigation
/
buttons to select desired option.
- DisEqc1.1: Press navigation
/
buttons to select desired option .
- Motor: Press navigation
/
buttons to select desired option.
ATV AND OTHER MODES
Press SOURCE button on remote control
to select the desired input source.
For other menus, please refer to the
operations of DTV mode.
PC/VGA MODE
1. Power on your computer and this TV.
2. Connect your computer to this TV using
a VGA cable.
3. Press SOURCE button on remote control
to select the PC input source.
4. Press MENU button to display the main
menu and press navigation
/
buttons to select SCREEN.
5. Press navigation buttons to select
/
desired option and press OK button to
enter submenu.
6. Press navigation buttons to adjust
/
the value.
- Auto Adjust: Adjust the value of screen
automatically.
- H-Offset: Adjust the value of horizontal
position from 0-100.
- V-Offset: Adjust the value of vertical
position from 0-100.
- Size: Adjust the value of size from 0-100.
- Phase: Adjust the value of phase from
0-100.
If there's an unsuitable phase setting,
the picture will shake.
-
Position Reset: Reset horizontal and
vertical position.
25