Aiwa LED-251FHD Mode D'emploi page 11

20
en
MAIN MENU
DTV MODE
Press SOURCE button on the TV or remote
control to select DTV input source.
A. CHANNEL
A.1 Auto Tuning
- Press navigation buttons to
/
select this item, and then press OK
button to enter it.
- Select preferred Tune Type using
navigation buttons and press OK
button to start auto tuning.
A.2 ATV Manual Tuning
- Press navigation buttons to
/
select this item, and then press OK
button to enter it.
- Press navigation buttons to
/
select the second option.
- Press navigation buttons to
/
adjust it.
A.3 DTV Manual Tuning
- Press navigation buttons to
/
select this item, and then press OK
button to enter it.
- Press navigation button to
/
select channel, then press OK button
to start searching.
A.4 Program Edit
- Press navigation buttons to
/
select this item, and then press OK
button to enter it.
- Press RED button to delete current
channel.
-
Press YELLOW button to move
current channel.
- Press BLUE button to skip current
channel.
- Press FAV button to add highlighted
channel to Favorite List and press
FAV again to remove it.
Notes:
• Scan Type and some other tuning options are adjustable only when "Digital Type" is DVB-C.
• Menu and operations mentioned in "A.3 DTV Manual Tuning" will vary for DVB-T and DVB-C.
A.5 Schedule List
- Press navigation buttons to
/
select this item, and then press OK
button to enter it. If any programs
are scheduled through Add menu
press YELLOW button on remote
control.
- Press navigation buttons to
/
switch between Schedule List and
Recorded List.
- Press RED button to delete the
highlighted option.
- Press YELLOW button to enter Add
menu page.
- Press BLUE button to enter Edit
menu page.
A.6 Signal information
- Press navigation button to
/
select this item, and press OK button
to display signal details, including
Channel Number, Frequency, Quality
and Strength.
A.7 CI information
- When an available CAM (Conditional
Access Module) card is connected to
the CI slot, the users can view related
information or manage your CAM card.
MAIN MENU
B. PICTURE
B.1 Picture mode
- Available options: Personal, Dynamic,
Standard, Mild.
B.2 Contrast
- The value of contrast can be adjusted
from 0-100.
B.3 Brightness
- The value of brightness can be adjusted
from 0-100.
B.4 Colour
- The value of colour saturation can be
adjusted from 0-100.
B.5 Tint (NTSC only)
- The value of tint can be adjusted from
0-100.
B.6 Sharpness
-
The value of sharpness can be adjusted
from 0-100.
B.7 Colour Temperature
- This item is used to adjust the optimum
colour temperature for suitable viewing.
Available options: Normal, Cold, Warm.
B.8 Noise reduction
- Available options: Off, Low, Middle, High.
B.9 HDMI Mode
- Select HDMI mode to connect an
external device.
Available options: Auto, Video, PC.
Notes:
• The value of Contrast, Brightness, Colour, Tint and Sharpness is adjustable only when Picture
Mode is Personal.
• The value of Treble and Bass is adjustable only when Sound Mode is adjustable and when Sound
Mode is Personal.
• AD Switch function works only when you are viewing programs that contain related narration
information.
C. SOUND
C.1 Sound mode
- Available options: Standard, Music,
Movie, Sports, Personal.
C.2 Treble
- This item is used to adjust the level of
higher-pitched sounds from 0-100.
C.3 Bass
- This item is used to adjust the level of
lower-pitched sounds from 0-100.
C.4 Balance
- This item is used to adjust the audio
output between left and right speakers
from -50 to 50.
C.5 Auto Volume Level
- This item is used to set Auto Volume
ON or OFF.
C.6 SPDIF Mode
- This item is used to select SPDIF mode.
Available options: Auto, PCM, Off.
C.7 Audio Delay
- Ajust this item if you find the sound is
not totally simultaneous with TV picture.
C.8 AD Switch
- This item is used to set AD Switch
ON or OFF. For Visually Impaired users,
this function can help to know a certain
scene or action through the narration,
instead of seeing it.
21