General Settings - Ezviz S2 Manuel De L'utilisateur

General Settings

00:00:00| 02:00:00
1080P / 30
Parameter
Misc Settings
Orientation
Default Mode
Vout Mode
Quick Capture
LED Blink
Flicker Mode
On Screen Display
Auto Off
Set Date and Time
Mic Gain
Speaker Gain
Auto Lock
Langauage
Camera Reset
Description
Adjust the Display direction.
Set the default Camera Mode for camera powered on.
Select HDMI or CVBS.
Turn on Quick Capture and restart the camera. Hold down
can work by the default Camera Mode.
Turn on/off the LED indicator.
Select according to your frequency of A.C., usually, 60HZ for North
America, Japan, etc., 50HZ for China, Europen countries, etc.
Open/Close screen display icons and digits.
Set the time for camera automatic power-off.
Set camera time and date.
Select the percentage for the Mic Gain.
Select the percentage for the Speaker Gain.
Set the time for screen automatic lock.
Select the language you desire.
Press to reset camera parameters to default.
16
, so it