Video Settings - Ezviz S2 Manuel De L'utilisateur

Video Settings

Parameter Description
Standard When you watch the video and photo of the S2 on a TV/HDTV, the video standards
should be the same as that of the television,
NTSC: Appropriate for the TV/HDTV in North America,
PAL: Appropriate for most of the TV/HDTV outside of North America.
Resolution Higher the resolution you select, the clearer the video will be and the bigger
storage space will need. You can select one resolution as needed. See page 13 for
details.
Frame Rate You can choose from 24 to 120.
Interval Under Video+Photo Mode, the interval (5/10/30/60 seconds) is the predefined
duration for capturing photos when videoing.
The video and photos are of the same resolution
Under Timelapse Mode, the interval (0.5/1/1.5/2/2.5/3/5 seconds) is the predefined
duration for capturing photos.
Slow Motion The video recorded by 120 framerate will turned to be the video of 30 framerate.
Dewarping Adjust image/video to the best shooting effec
Low Light When the environment is dark, the camera can adjust the frame rate to get the
best exposure.
EIS Electronic image stabilization.
Split Mode Any video file which is longer than predefined time will be divided into several files
automatically
Meter Mode Select the exposure region which includes three options: Central Meter, Average
Meter and Spot Meter.
Loop Mode New video and photo files will overwrite the old ones when the microSD card is
full with no prompts. After turning off this mode, once SD card is full, the camera
cannot record or take photos.
12