asmodus LUSTRO Manuel D'utilisation page 70

Using the Device
68
Settings in TCR Mode (Temperature Coefficient of Resistance)
Selecting the TCR Memory Cell (M1 – M5): When the screen is unlocked in TCR mode, swipe up or down
the screen to switch between the TCR memory cells (M1 – M5).
Setting TCR Value: When the screen is unlocked in TCR mode, press and hold the TCR display. Then press
" " or " " to set the TCR value. Swipe left or right to select editing digit. Press the Fire button to confirm your
setting and end the process.
Settings regarding wattage or temperature, as well as the dial display settings can be done equal to the
proceeding in the TEMP-Modus.