SCS Sentinel OutCam SVI0061 Notice D'utilisation Et D'installation page 29

F- TECHNICAL SPECIFICATIONS F- TECHNICAL SPECIFICATIONS
Camera
Resolution
Wi-Fi range
Compatibility
Motion detection/Night vision
Memory card
Video recording
Horizontal view angle
Vertical view angle
Horizontal rotation range
Vertical rotation range
Operating frequency
Max. transmit power
Weather-resistant
Adaptor
Power supply
G- TECHNICAL ASSISTANCE G- TECHNICAL ASSISTANCE
Troubleshooting assistance
Problem encountered
If adding the camera fails - Check the power supply is properly connected.
- Check that you are connected to wi-fi when entering the wi-fi password
and do not include spaces.
- Check that you have entered the wi-fi password correctly.
- Check that your router is connected to the internet.
- Make sure you have sufficient bandwidth.
- Check that your smartphone is connected to the same network entered in
the app.
- Check that the wi-fi network you are attempting to connect to is on 2.4
GHz and not 5 GHz.
- Pairing must be completed within 3 m of the wi-fi router.
- Contact your internet service provider to check your router's settings
(UPNP activated, MAC address filtering deactivated, SSID not hidden,
DHCP activated, VPN or Proxy deactivated)
1080p
30 m free-field range
iOS, Android
Yes
SD micro from 4 to 128 Go (not supplied)
Yes (on SD micro card)
85°
45°
270°
90°
2412-2472 MHz
< 100 mW
IP 65
Model identifier : SA-1202000EU
Input voltage : 100-240V AC
Input AC frequency : 50/60Hz
Output voltage : 12V DC
Output current : 2A
Output power : 24W
Average active efficiency : 87,38%
Efficiency at low load (10%) : 80,13%
No-load power consumption : 0,06W
Solutions
EN
29