Publicité
Les langues disponibles
Les langues disponibles
PIMP LASER
USER MANUAL
Thank you for using our products. For the sake of safety and better operation of this product, please read this
manual carefully before using and operating it.
It contains important information about the security of the facility and on the use and maintenance of
equipment.
Keep this manual for future reference. In case of sale of equipment to another user, it is important that this
manual is attached to the equipment so the new user has the necessary information regarding the warnings on
safety.
It is essential that the user duly follows the safety instructions and warnings mentioned in this user manual. The
dealer won't be responsible for the defaults or any other problems due to the mishandling from the user and the
non-following of the instructions included in this manual.
This product is suitable for creating perfect laser programs and high-quality laser effects.
This unit is designed to produce decorative effect lighting and is used in light show systems.
This product is a so-called show laser emitting radiation with a wavelength spectrum and producing lasers for
shows. Please refer to the safety instructions specific for lasers.
Before any first use, unpack the set and make sure there was no damage during transport. Check for missing any
part supplied with the laser:
1 x PIMP LASER / 1 x Power Cable / 1 x tripod / 1 x User Manual FR+ENG
GENERAL SAFETY INSTRUCTIONS
Before using this unit make sure the power supply is ground.
Before using, make sure the voltage is appropriate with the information mentioned at the rear panel of
the unit.
To avoid any shock hazard, do not open or remove the cover.
This unit is designed for indoor use only. Do not expose the unit to rain or moisture.
The working temperature of the unit is from 15 to 30°C. Do not use it at higher temperature.
Do not switch on and off many times to avoid reducing the life of the fixture.
Do not use the unit for more than 2 hours in order to prevent the decrease of life duration of your
fixture.
Always unplug the unit when we do not use it for a long time or before servicing.
Do not place metal objects or spill liquids in/over the unit. If it occurs, please disconnect the unit from
the mains at once.
Keep the device away from flammable or hot sources.
The fixture should be placed in a ventilated area and fixed at 50 cm at least from the walls.
Do not cover the ventilation openings as it may result in overheating.
Do not use the unit id dusty environment. Please use soft cloth to remove dust that would be place in
the external lens. Clean the unit regularly.
Keep away from children or any non qualified persons.
Do not remove the stickers placed on the unit. It is forbidden to make any unauthorized modifications
to the unit due to safety reasons.
If some parts are visibly damaged , do not use the unit and contact your dealer
Please use the original packaging for transporting the device.
SAFETY INSTRUCTION FOR LASER
According to EN/IEC 60825-1 regulations, this laser is classified under 3B class. Direct eye exposure can be
dangerous
LASER RADIATION!
UNIT UNDER 3 B CLASS
AVOID DIRECT EYE EXPOSURE
This product is a so-called show laser emitting radiation with a wavelength spectrum and producing lasers for
shows.
A laser (Light Amplification by Stimulated Emission of Radiation) is a device that emits light trough a process of
optical amplification and produce electromagnetic radiation of different wavelengths due to the controlled
stimulated emissions process.
In addition to the secondary effects due to the operating laser conditions, fire risks or burning hazards, the most
important danger comes from the light source. The damages on eyes depend on the laser wavelengths
specifications, the eye distance and the elements linked to the eye specifications. This danger is amplifies if the
laser beams are focused to tiny spots; that is why the effects on eyes are even more important while using lasers.
In accordance with French applicable decree n° 2012-1303 dated from November 26, 2012, the use of lasers
above class 2 is restricted to professional activities (light shows, performing arts...).
Restricted uses can be seen on: http://www.legifrance.gouv.fr/ (French only)
Make sure to check your country's restrictions and law regarding the use of lasers
EXPELEC cannot be liable for damages caused by incorrect installations or uses
TECHNICAL SPECIFICATION
Power Supply : AC110V – 240V / 50-60Hz
Colors :
Green 532nm / 30mW
Red 650nm / 100mW
Dimensions : 130 x 92 x 52 mm
Weight: 0.4 kg
1.
Laser aperture / ouverture du laser
2.
Regulating the rev of the motor / Ajustement de la vitesse d'exécution
3.
Sound-Active or Auto mode / Mode Musical ou Auto
4.
MIC / Micro
5.
Adjusting the frequency of the strobe / Ajustement de la fréquence du strobe
Stroboflash 2: ON – 3: OFF / Déclenchement du strobe 2: ON 3: OFF
6.
DANGER
Publicité
