Changing The Fuses; Service; Disposal - AEG 10714 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
www.aeg-automotive.com
20

Changing the fuses

A fuse inside the car plug safeguards
the device. This will respond in the
event of a short circuit or voltage peaks
and must then be replaced.
Attention!
Do not use higher rated fuses. The elec-
tronics may otherwise be damaged.
3
2
1
1. unscrew the retaining pin (1) with
the fuse cover (2) from the car plug
(4).
2. Insert a new micro-fuse (3) of the
same rating (see Technical Data).
3. Replace the retaining pin (1) with
the fuse cover (2) in the car plug (4).

Service

Should you have any questions regard-
ing commissioning or operating in spite
of studying these operating instruc-
tions, or if a problem should occur
against all expectations, please get in
contact with your specialist supplier.

Disposal

The packaging consists of non-contam-
inating materials that you can dispose
of at your local recycling point.
In accordance with European Directive
2012/19/EC for waste electrical and
electronic equipment (WEEE) and con-
4
version to national law, used electrical
appliances must be collected separately
and taken to a recycling point. For ways
to dispose of old electrical appliances
please contact your community or city
administration.
Illustrations may vary slightly from the
product itself. We reserve the right to
modify the product in accordance with
technical advances. Decoration not
included.
Do not throw electrical appliances
in with domestic waste!

Publicité

Table des Matières
loading

Table des Matières