Unique Lighting Control - Irritrol R-100-KIT Mode D'emploi

Unique Lighting Control

As an allied brand to Irritrol in the landscaping industry, Unique Lighting offers remote control of its landscape lighting
products. The commands for its remote lighting control are included in the remote system described in this guide. The
basic control functions are furnished below.
To Switch Over to Unique Lighting Remote Control:
1. After activating the remote, press the SETUP
display on the left and "of" flashes on the right.
2. Press the UP arrow button to turn "on" the lighting control.
3. Press and hold the MODE/PWR
4. Release the MODE/PWR
minutes. There are four light stations available, accessed with the UP arrow button. Adjust light station run times as
described in the zone control section of General Operation.
5. Above L4 is "LA on". "LA" stands for Lightings All, as in all zones at once. "LA on" turns all lights zones on. "LA oF" turns
all light zones off. After selection, press ENTER
6. To return to irrigation remote control, press and hold the MODE/PWR
display progresses through "off" and "CL" appears. Release the button to see the irrigation station #1.
button three times until "UL" (for Unique Lighting) appears in the
button (about two seconds) until the display progresses through "off" to "LITE".
button. "L1" for light station #1 appears along with the default remote time of 10
.
button (about two seconds) until the
11