Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PICT. 10-11
4.2.2 Repositioning of the bowl and top
Once the cleaning is done, put the bowl back on, and make sure that the four pins
underneath (PICT. 11) are correctly fixed in the four holes K of the machine; then block the
bowl rotating clockwise the disk O. Put the top down pushing it downwards (PICT. 9) as far
as it is blocked by the pin M.
4.3 Usage of the machine with two speeds
OPERATING: Rotate the knob of the switch C in position 1 (PICT. 7), select speed 1 or 2
by rotating the knob of the selector H, push the green button D to operate both the bowl
and the spiral. In order to change the speed of rotation of the machine, rotate te knob H
from position 1 to 2 or vice versa. After each change of speed push the button D.
STOP: Rotate the knob of the switch C in position 0, or push the red button E to stop both
the bowl and the spiral.
37
SPIRAL MIXER - iM Series Operating manual

Publicité

Table des Matières
loading

Produits Connexes pour Moretti Forni IM 5

Table des Matières