Electrical Connections; Positioning Of The Machine - Moretti Forni IM 5 Manuel D'instructions

PICT. 3 PICT. 4

2.3 Electrical connections

The connections type Y of the machine with the electric network is made by means of an
operation cable, which is provided with a plug only in the singlephase model. As far as the
three-phase machines are concerned it is necessary to put together the cable and a
normalized and polarized plug (the distinction between phase and neutral must be
unequivocal), and verify that the rotation way of the bowl is the same indicated by the
arrow on the bowl.

2.4 Positioning of the machine

The plug must be easily accessible, must not require any kind of movement. The cable
from the machine to the wall plug must not be pulled tightly, also do not rest the machine
on the cable.
32
SPIRAL MIXER - iM Series Operating manual