Maintenance - DigiTrace T-M-20-S/EX Serie Mode D'emploi

ture sensor. The error can be as much as 1.5 Kelvin per metre and 10
Kelvin temperature difference. Depending on the particular configuration,
either reinstall the capillary tube or – in the case of minor differences –
carry out a readjustment as shown in Figure 5.

6. Maintenance

The provisions of ElexV §9, ElexV §13 and EN 60079-17 pertaining of serv-
icing, maintenance and testing must be complied with. During servicing, it
is particularly important to check those components on which the type of
protection depends.
9