Indicator Lights - Silhouette DIM32D1BSSPR Guide D'utilisation Et Soins De Propriètaire

CONTROLS OF THE ICE MAKER
The ice maker should be placed where the ambient temperature is between 10-32°C (50-90° F). If the ambient tem-
perature is above or below this range, the performance of the unit may be affected.
Control
Check the water supply
1. Turn off water supply.
2. Disconnect water supply line from the ice maker.
3. Position water supply line in a bucket.
4. Turn on water and make sure water pours into the bucket.
5. Turn water supply off again, then reconnect the water sup-
ply line to the ice maker.
* If unsure, please contact your local plumber.

INDICATOR LIGHTS

OPERATING INSTRUCTIONS
Type
Button
Button
Button
Button
Single Indicator light
Single Indicator light
Single Indicator light
Single Indicator light
Simultaneous
Indicator lights
Simultaneous
Indicator lights
Simultaneous
Indicator lights
Action Function Explanation
To turn the ice mak-
Press
er on/off (press and
hold this button for
approximately 3 seconds)
Press
Small ice
Press Medium ice
Press Large ice
ON
Small ice is selected.
1
FLASHING
ON
Medium ice is selected.
Large ice is selected.
ON
FLASHING
Ice bucket is full of ice
ON
Compressor on
OFF Compressor off
FLASHING Stand-by mode
All on at the
2
same time
3
2 sizes fl ashing at the
same time for 15
seconds
All icons fl ashing at
4
the same time
4
Water tank is full
and beeping. (see trou-
bleshooting section)
Ice maker low on
water (see trouble-
shooting section)
Sensor breakdown
(see troubleshoot-
ing section)
System malfunction
(see troubleshooting
section)